Difference between revisions of "Instruction Manual"

From Balthazar
Line 1: Line 1:
 
== Balthazar Instruction Manual ==
 
== Balthazar Instruction Manual ==
  
In this video it is shown how Balthazar modules and components are connected and how it all fits into the case.
+
In this video it is illustrated how Balthazar modules and components are connected and how it all fits into the case.
  
Main modules are connected via a flat and short USB cable, while 2-wire cable connects to a speaker.
+
'''Description:'''
3-wire cables are used to connect to the battery pack. All the elements are placed into the casing and screwed to a chassis.
+
 
 +
Main modules – [[Power Supply|PSU]], [[I/O USB|I/O board]], [[Keyboard|the keyboard]] and [[Unifying-PCB|Unifying board]] are connected via a flat and short USB cable, while 2-wire cable connects to a speaker.
 
   
 
   
 +
3-wire flat cables are used to connect to the battery pack.
 +
 +
Camera goes into the unifying board via USB.
 +
 +
The touchpad and small screen are connected to a IC2 that is on the keyboard PCB.
 +
 +
The screen is connected to a Unifying Board that also has a video output.
 +
 +
All the elements are placed into the casing and screwed to a chassis.
 +
 +
Upper covers of the keyboard are fitted.
  
 
{{#evt:
 
{{#evt:

Revision as of 12:20, 17 June 2022

Balthazar Instruction Manual

In this video it is illustrated how Balthazar modules and components are connected and how it all fits into the case.

Description:

Main modules – PSU, I/O board, the keyboard and Unifying board are connected via a flat and short USB cable, while 2-wire cable connects to a speaker.

3-wire flat cables are used to connect to the battery pack.

Camera goes into the unifying board via USB.

The touchpad and small screen are connected to a IC2 that is on the keyboard PCB.

The screen is connected to a Unifying Board that also has a video output.

All the elements are placed into the casing and screwed to a chassis.

Upper covers of the keyboard are fitted.

Nlnet banner.png NGI0 tag.png