Basic specifications and features
Balthazar is made to run on Trisquel GNU, Debian and Ubuntu variants of 64 bit low-latency kernel for RISC-V.
CPU and RAM - as the development goes on BPCD is based on RISC-V and ISA architecture multi-core SoM or a System on a Module "card" that is exchangable and upgradeble. We put in maximum possible RAM and we use fastest clock speeds to achieve the best possible computing performance. There should be no compromise there.
GPU - ARM's MALI-400 architecture would do great, but we also look into drivers' compatibility and openness, too.
While NVIDIA would be technically possibly the best performance choice, issues arise with general attitude towards FOSS compatibilty. In any case we look and listen into NVIDIA and CUDA options, accelerating totally open documentation from NVIDIA's side.
Also the NVIDIA's Jetson platform is researched for a compatibility with RISC-V architecture, ISA and FOSS .
Fanless - less movable parts means more battery time for the processing power and a passive cooling adds to the longevity of the components. Think quiet.
Boot and sleep - fast boot time, as nobody has and especially children do not have the patience to wait.
Ever since C64/AMIGA times computers should be also able to be switched on/off fast, so using Libreboot/Coreboot BIOS attitude for embedded should do it.
BPCD suspends to RAM and goes to hibernate when battery is at 20%. Properly.
Upgradeable - RAM and a processor-board featuring second SoC/SoM attachment port.
A non-glare screen - size is 13.3” 16:10 full HD resolution (200 dpi +) that provides far less strain on user's eyes.
A non-reflective - a button driven backlight “off” monochrome mode for very low-power use in sunlight - prolongs a battery life a lot.
LED backlit - colour mode with an alternance of red, green and blue pixels.
A detachable webcam - also with a slide lens cover and a hardware switch for on/off
A volume wheel - ceramic potentiometer with a “click” for the on/off functionality.
GPIO - a retractable and flexible robust flat-ribbon cable connecting General Purpose Input Output 16 pins array for connecting to all the things you want to connect it to.
Quick charging battery - Long Life Cycle Polymer 10000 mAh that is also recyclable.
Hot-swap - a second small battery enabling main battery hot-swap.
Modular - on-board power supply that follows full ACPI specification.
Waterproof keyboard - with a track-point ball.
Multitouch pad - flat-flush and positioned above the keyboard. It has a “Wacom”-style mode for the extended stylus or a finger draw. It is multi-touch and gestures capable.
Casing - a tough, rugged form-factor done by LEGO® A/S in a multi-colour recyclable plastic with added LEGO® studs.
Hardware security and privacy features:
Four (4) hardware off/on switches - webcam (detachable), speakers, the microphones array (detachable) and obligatory Wi-Fi.
Detachable USB gender-changer dongle - that should prevent anyone to plug in USB-anything unless it is attached and a password unlocked, also when it is taken out prevents anyone to stick USB-anything in.
A few extras:
TEMPEST-shield internal cabling - shields from any external and internal electromagnetic radiation. Lead-free, but not inexpensive, mind you.
A stylus - for a pad drawing, also provides enhanced entropy while generating PGP keys, easy graphic editing, poking someone etc.
Additional adapter with onboard:
LEGO® Power Functions - for powering and the control of actuators. .
RJ-12 LEGO® - “a shifted notch” connector for LEGO® MINDSTORMS® series of actuators and sensors
Charms:
LEGO® keychain - for the USB dongle.
