Difference between revisions of "I/O USB"
| Line 26: | Line 26: | ||
Those will be regularly updated as schematics and PCBs are continuously improved and optimised. | Those will be regularly updated as schematics and PCBs are continuously improved and optimised. | ||
| + | |||
| + | === BalthazarPSU2 + I/O unifying board === | ||
| + | |||
| + | Top and bottom views of an integrated I/O hub with USB | ||
| + | |||
| + | <gallery> | ||
| + | File:BalthazarIO1PSU2.png|thumb|top | ||
| + | File:BalthazarIO2PSU2.png|thumb|bottom | ||
| + | </gallery> | ||
| + | |||
| + | With first chip from the left is a Texas Instruments BQ24193 acts as a buck-boost converter/ battery charger | ||
| + | another chip is a Texas Instruments TPS63020 for internal power acting as buck-boost converters (for 3.3V and 5V) | ||
| + | Onboard is also Diodes Incorporated PAM8403 enabling 3W class-D audio amplifier while Microchip USB2514 is used as a USB 2.0 four port hub. | ||
Go to: | Go to: | ||
[[Keyboard|Keyboard]] or [[Power_Supply|Power Supply]] | [[Keyboard|Keyboard]] or [[Power_Supply|Power Supply]] | ||
Revision as of 12:40, 22 December 2020
Balthazar I/O USB board
IO-board basically means connectivity with peripheral devices. These can be seen as on-board and out-board. On-board devices include: keyboard + trackpad, webcam and optional audio-card. USB is the usual solution for this. Here for the on-board periphery a simple USB 2.0 hub is enough. Main mini-computer board usually provides a much better hub for 4 downstream USB devices. At this point this is still mainly USB 2.0. Of course, some type of mass storage / system disk would be needed: microSD – and especially versions of SSD (SATA or PCIe) – directly or via USB adapter. This would benefit a faster USB port – USB3.x (part of the mini-computer system-on-chip) – or PCIE bus.
Our solution for internal hub:
We chose the GL850G (ssop28-pin) four-port USB 2.0 hub chip with additional two pieces of AIC1526-0 dual USB high-side switch – to switch-off/on manually. It is a well-proven design. Hub will be powered via the upstream port – connected to the mini-computer board. Internal USB periphery power demands are predictable = low, so the usual 500mA limit for the hub is ok. The keyboard + touchpad combination is USB1.1 protocol, webcam and optional audiocard are USB2.0.
Internal USB devices can be switched of manually. This helps with the privacy – the microphone and webcam. For external USB devices disabling the USB power line is the same as unplugging the USB device. The "condom" approach with disabling the data lines is a bit better, but solves things mostly with USB plugging into public charging stations. The TPS2540 solution is USB charging current negotiator – with no datalines connected. A dedicated (micro-USB) charging port solves this problem. The already developed Balthazar PSU-charger has this option.
top
side
bottom
PCB is ready for a prototype as KiCad files are available at our Github pages.
Those will be regularly updated as schematics and PCBs are continuously improved and optimised.
BalthazarPSU2 + I/O unifying board
Top and bottom views of an integrated I/O hub with USB
top
bottom
With first chip from the left is a Texas Instruments BQ24193 acts as a buck-boost converter/ battery charger another chip is a Texas Instruments TPS63020 for internal power acting as buck-boost converters (for 3.3V and 5V) Onboard is also Diodes Incorporated PAM8403 enabling 3W class-D audio amplifier while Microchip USB2514 is used as a USB 2.0 four port hub.
Go to: Keyboard or Power Supply
