Difference between revisions of "Instruction Manual"
From Balthazar
| Line 5: | Line 5: | ||
'''Description:''' | '''Description:''' | ||
| − | Main modules – [[Power Supply|PSU]], [[I/O USB|I/O board]], [[Keyboard|the keyboard]] and [[Unifying-PCB|Unifying board]] are connected via a flat and short USB cable, while the flat 2-wire cable connects to a speaker. | + | Main modules – [[Power Supply|PSU]], [[I/O USB|I/O board]], [[Keyboard|the keyboard]] and [[Unifying-PCB|Unifying board]] are connected via a flat and short USB cable Type A or a combined, while the flat 2-wire cable connects to a speaker. |
3-wire flat cables are used to connect to the battery pack. | 3-wire flat cables are used to connect to the battery pack. | ||
Revision as of 13:23, 20 June 2022
Balthazar Instruction Manual
In this video it is illustrated how Balthazar modules and components are connected and how it all fits into the case.
Description:
Main modules – PSU, I/O board, the keyboard and Unifying board are connected via a flat and short USB cable Type A or a combined, while the flat 2-wire cable connects to a speaker.
3-wire flat cables are used to connect to the battery pack.
Camera goes into the unifying board via USB.
The touchpad and small screen are connected to a I2C that is on the keyboard PCB.
The screen is connected to a Unifying Board that also has a video output.
All the elements are placed into the casing and screwed to a chassis (in development).
Upper covers of the keyboard are fitted.
