Difference between revisions of "I/O USB"
| Line 2: | Line 2: | ||
| − | IO-board | + | IO-board means connectivity with peripheral devices. These can be seen as on-board and out-board. On-board devices include keyboard + trackpad, webcam, and optional audio card. USB is the usual solution for this. Here for the onboard periphery, a simple USB 2.0 hub is enough. The main mini-computer board usually provides a much better hub for 4 downstream USB devices. |
| − | At this point this is still mainly USB 2.0. Of course, some type of mass storage / system disk would be needed: microSD – and especially versions of SSD (SATA or PCIe) – directly or via USB adapter. | + | At this point, this is still mainly USB 2.0. Of course, some type of mass storage/system disk would be needed: microSD – and especially versions of SSD (SATA or PCIe) – directly or via USB adapter. |
| − | This would benefit a faster USB port – USB3.x (part of the mini-computer system-on-chip) – or | + | This would benefit a faster USB port – USB3.x (part of the mini-computer system-on-chip) – or PCIe bus. |
'''Our solution for internal hub:''' | '''Our solution for internal hub:''' | ||
We chose the GL850G (ssop28-pin) four-port USB 2.0 hub chip with additional two pieces of AIC1526-0 dual USB high-side switch – to switch-off/on manually. It is a well-proven design. Hub will be powered via the upstream port – connected to the mini-computer board. Internal USB periphery power demands are predictable = low, so the usual 500mA limit for the hub is ok. | We chose the GL850G (ssop28-pin) four-port USB 2.0 hub chip with additional two pieces of AIC1526-0 dual USB high-side switch – to switch-off/on manually. It is a well-proven design. Hub will be powered via the upstream port – connected to the mini-computer board. Internal USB periphery power demands are predictable = low, so the usual 500mA limit for the hub is ok. | ||
| − | The keyboard + touchpad combination is USB1.1 protocol, webcam and optional | + | The keyboard + touchpad combination is USB1.1 protocol, webcam, and optional audio card are USB2.0. |
[[File:SchemeUSB.png|thumb|center]] | [[File:SchemeUSB.png|thumb|center]] | ||
| − | Internal USB devices can be switched | + | Internal USB devices can be switched off manually. This helps with the privacy – the microphone and webcam. For external USB devices disabling the USB power line is the same as unplugging the USB device. The "condom" approach with disabling the data lines is a bit better but solves things mostly with USB plugging into public charging stations. The TPS2540 solution is a USB charging current negotiator – with no data lines connected. A dedicated (micro-USB) charging port solves this problem. |
The already developed Balthazar PSU-charger has this option. | The already developed Balthazar PSU-charger has this option. | ||
| Line 27: | Line 27: | ||
PCB is ready for a prototype as KiCad files are available at our [https://github.com/balthazar-space Github] pages. | PCB is ready for a prototype as KiCad files are available at our [https://github.com/balthazar-space Github] pages. | ||
| − | Those will be regularly updated as schematics and PCBs are continuously improved and | + | Those will be regularly updated as schematics and PCBs are continuously improved and optimized. |
=== BalthazarPSU2 + I/O unifying board === | === BalthazarPSU2 + I/O unifying board === | ||
| Line 38: | Line 38: | ||
</gallery> | </gallery> | ||
| − | In a top view with first chip on the left is a Texas Instruments BQ24193 that acts as a buck-boost converter/ battery charger, | + | In a top view with the first chip on the left is a Texas Instruments BQ24193 that acts as a buck-boost converter/ battery charger, |
another chip is a Texas Instruments TPS63020 for an internal power acting as buck-boost converters (for 3.3V and 5V) | another chip is a Texas Instruments TPS63020 for an internal power acting as buck-boost converters (for 3.3V and 5V) | ||
| − | Onboard is also Diodes Incorporated PAM8403 enabling 3W class-D audio amplifier while Microchip USB2514 is used as a USB 2.0 four port hub. | + | Onboard is also Diodes Incorporated PAM8403 enabling 3W class-D audio amplifier while Microchip USB2514 is used as a USB 2.0 four-port hub. |
| − | For more on schematics, elements, | + | For more on schematics, elements, bills of materials visit our [https://github.com/balthazar-space/balthazarPSU2 Github] page. |
Go to: | Go to: | ||
[[Keyboard|Keyboard]] or [[Power_Supply|Power Supply]] | [[Keyboard|Keyboard]] or [[Power_Supply|Power Supply]] | ||
Latest revision as of 21:09, 10 October 2021
Balthazar I/O USB board
IO-board means connectivity with peripheral devices. These can be seen as on-board and out-board. On-board devices include keyboard + trackpad, webcam, and optional audio card. USB is the usual solution for this. Here for the onboard periphery, a simple USB 2.0 hub is enough. The main mini-computer board usually provides a much better hub for 4 downstream USB devices. At this point, this is still mainly USB 2.0. Of course, some type of mass storage/system disk would be needed: microSD – and especially versions of SSD (SATA or PCIe) – directly or via USB adapter. This would benefit a faster USB port – USB3.x (part of the mini-computer system-on-chip) – or PCIe bus.
Our solution for internal hub:
We chose the GL850G (ssop28-pin) four-port USB 2.0 hub chip with additional two pieces of AIC1526-0 dual USB high-side switch – to switch-off/on manually. It is a well-proven design. Hub will be powered via the upstream port – connected to the mini-computer board. Internal USB periphery power demands are predictable = low, so the usual 500mA limit for the hub is ok. The keyboard + touchpad combination is USB1.1 protocol, webcam, and optional audio card are USB2.0.
Internal USB devices can be switched off manually. This helps with the privacy – the microphone and webcam. For external USB devices disabling the USB power line is the same as unplugging the USB device. The "condom" approach with disabling the data lines is a bit better but solves things mostly with USB plugging into public charging stations. The TPS2540 solution is a USB charging current negotiator – with no data lines connected. A dedicated (micro-USB) charging port solves this problem. The already developed Balthazar PSU-charger has this option.
top
side
bottom
top
bottom
PCB is ready for a prototype as KiCad files are available at our Github pages.
Those will be regularly updated as schematics and PCBs are continuously improved and optimized.
BalthazarPSU2 + I/O unifying board
Top and bottom views of an integrated I/O hub with USB
top
bottom
In a top view with the first chip on the left is a Texas Instruments BQ24193 that acts as a buck-boost converter/ battery charger, another chip is a Texas Instruments TPS63020 for an internal power acting as buck-boost converters (for 3.3V and 5V) Onboard is also Diodes Incorporated PAM8403 enabling 3W class-D audio amplifier while Microchip USB2514 is used as a USB 2.0 four-port hub.
For more on schematics, elements, bills of materials visit our Github page.
Go to: Keyboard or Power Supply
