Instruction Manual

From Balthazar

Balthazar Instruction Manual

In the video below, it is illustrated how Balthazar modules and components are connected and how it all fits into the case.


Main modules – PSU, I/O board, the keyboard and Unifying board are connected via a flat and short USB cable Type A or a combined, while the flat 2-wire cable connects to a speaker.

3-wire flat cables are used to connect to the battery pack.

Camera goes into the unifying board via USB or a flat cable.

The touchpad and small screen are connected to a I2C that is on the keyboard PCB.

The screen is connected to a Unifying Board that also has a video output.

All the elements are placed into the casing and screwed to a chassis (in development).

Upper covers of the keyboard are fitted.

Internal connections are also available for camera adoptions, as it is shown on the video below.

GPIO cable we implement is ribbon cable with IDC connectors; 40x28AWG; Cable ph: 1.27mm.

Speakers 8 ohm, 2W, with connector to our Power Supply Unit PCB

Space for batteries is reserved under the keyboard. At the moment Power Supply has been tested with Samsung battery with 4800 mAh and more specs are on our Specifications page.

Nlnet banner.png NGI0 tag.png