Difference between revisions of "Instruction Manual"

From Balthazar
(3 intermediate revisions by the same user not shown)
Line 5: Line 5:
 
'''Description:'''
 
'''Description:'''
  
Main modules – [[Power Supply|PSU]], [[I/O USB|I/O board]], [[Keyboard|the keyboard]] and [[Unifying-PCB|Unifying board]] are connected via a flat and short USB cable, while 2-wire cable connects to a speaker.
+
Main modules – [[Power Supply|PSU]], [[I/O USB|I/O board]], [[Keyboard|the keyboard]] and [[Unifying-PCB|Unifying board]] are connected via a flat and short USB cable Type A or a combined, while the flat 2-wire cable connects to a speaker.
 
   
 
   
 
3-wire flat cables are used to connect to the battery pack.  
 
3-wire flat cables are used to connect to the battery pack.  
Line 11: Line 11:
 
Camera goes into the unifying board via USB.
 
Camera goes into the unifying board via USB.
  
The touchpad and small screen are connected to a IC2 that is on the keyboard PCB.  
+
The touchpad and small screen are connected to a I2C that is on the keyboard PCB.  
  
 
The screen is connected to a Unifying Board that also has a video output.
 
The screen is connected to a Unifying Board that also has a video output.
  
All the elements are placed into the casing and screwed to a chassis.  
+
All the elements are placed into the casing and screwed to a chassis (in development).  
  
 
Upper covers of the keyboard are fitted.
 
Upper covers of the keyboard are fitted.

Revision as of 13:23, 20 June 2022

Balthazar Instruction Manual

In this video it is illustrated how Balthazar modules and components are connected and how it all fits into the case.

Description:

Main modules – PSU, I/O board, the keyboard and Unifying board are connected via a flat and short USB cable Type A or a combined, while the flat 2-wire cable connects to a speaker.

3-wire flat cables are used to connect to the battery pack.

Camera goes into the unifying board via USB.

The touchpad and small screen are connected to a I2C that is on the keyboard PCB.

The screen is connected to a Unifying Board that also has a video output.

All the elements are placed into the casing and screwed to a chassis (in development).

Upper covers of the keyboard are fitted.

Nlnet banner.png NGI0 tag.png NGI0Entrust tag.png